Top 10 Best Welder for Beginners

It is not easy to learn a new skill. To develop a new skill, you need the best tools and a lot of practice. If you are a DIY work like personal and want to learn to weld, then you are in the right place. I and my team select make a list for the best welder for beginner.

We do a lot of research before we pick up these welders. By reading this article, you can find out the best welder for learning to weld. If you read the full article, then you can get an idea about welders and welding. And if you have any confusion and question about welder, then I hope you can get a clear idea by reading the end of this article.

Because it is easy to get confused when you start learning something new, and it’s happened to everybody at the beginning of learning. So, continue ready to find out which is the best welder for beginners.

Comparison of 10 Top Rated Welders For Beginners

Name

Image

Voltage

Duty cycle

Weight

Dimensions

Buy

Forney Easy Weld 140 MP Multi-Process Welder

120V

30%

24.81 pounds

14.19 X 19.31 X 11.61 inches

Buy on Amazon

Lincoln Electric K2278-1 Handy 

115V

20%

45 pounds

8.8 x 18 x 12.8 inches

Buy on Amazon

Hobart 500551 EZ-TIG 165i AC/DC TIG Welder 230V

230V

20%

60 pounds

26.8 x 13.7 x 20.8 inches

Buy on Amazon

Millermatic 141 MIG Welder

120V

20%

64.1 pounds

23.9 x 15.6 x 16.9 inches

Buy on Amazon

2019 EverlastPowerTIG 185 DV TIG Stick Welder

110V and 220V

35%, 100%

40 pounds

24X9X17 inches

Buy on Amazon

LOTOS MIG140 140 Amp MIG Wire Welder

110V and 120V

20%

54 pounds

16 X 14.5 X 9.6 inches

Buy on Amazon

Forney 322 140-Amp MIG/Stick/TIG Multi-Process Welder

120V

20%, 60%,100%

38 pounds

19 X 9.5 X 16.5 inches

Buy on Amazon

SUNGOLDPOWER ARC MMA Welder

110V and 220V

60%

16.45 pounds

18 x 13.2 x 8.2 inches

Buy on Amazon

YESWELDER Digital MIG-205DS MIG Welder

110V and 220V

20%

35 pounds

20.1X14.8X11.4 inches

Buy on Amazon

2020 Weldpro 200 Amp Inverter Multi-Process Welder

110V and 220V

30%

30.4 pounds

17.7 x 8.7 x 15 inches

Buy on Amazon

What is Welder Machine?

The welding machine makes join between two metals by melting them. Welding machine melts the base metals, and filler materials come from a welder gun to make the joint strong. To do welding, you are going to need a shielding gas to protect the filler metals and base melt metal from being oxidized.

There are many different kinds of power sources used for welding. You can use the gas flame, an electric arc, a leaser, friction, etc. And welding machine has a wide range of use, and it can perform welding in various environments. Day by day, the welding machine getting advanced technology upgrade and the welding process become more accessible than before. Maybe you are thinking then what’s the best welder for beginners.

Now let’s have a look at some welder machines you can find nowadays.

What kinds of welder machines are available? 

The engineers are developing different types of welding machines for different kinds of works. And these machines play a big role in various kinds of welding jobs. Below there is some welding machine which is the best welder for beginners, and you can practice with them at home.

MIG welder

The first welder machine we choose is a MIG welder machine. This type of welder machine is easy to operate, and you can maintain the device by reading the user manual. In the MIG welding process, a solid wire comes out from a spool through a MIG torch and the speed of wire feed control automatically.

The electric current flow between the base metal and the filler wire creates a high temperature to melt the base metal and wire to make a strong join. The MIG welding process is easy and clean. By MIG welder you can weld thin to thicker metals. So, the MIG welder is the best welder for novice.

Flux-cored welding is another MIG welding process. There are a few differences between MIG and arc welding. In the flux-core wire feed process, you do not shield gas like the solid wire welding. The flux-cored wire shields the welding area and produces better welding results. By using flux-cored wire, you can easily perform your welding, and you do not have to worry about too much cleaning.

The flux-cored welding process is accessible because you can work indoor and outdoor on dirty materials. And it also provides high-speed welding, and you do not have to carry gas for this process.

TIG welder

In the TIG welding process, use a non-consumable tungsten electrode to produce the weld. The shielding gas protects the welding area, and the electrode form oxidation. The Argon gas and Helium are used as a shielding gas in the TIG welding process. By providing constant current supply, it produces high energy that goes through the arc, and the ionized gas creates the plasma.

You can use the TIG welding process on thin allow steel, stainless steel, aluminum, copper alloy, and magnesium. TIG welding is harder than other welding processes, and you have to do so many practices before getting perfect welding results. But you can get strong and high-quality welding by using TIG welder.

Stick welder

Stick welding is the oldest welding process, and it was popular before the MIG welder takes over the place. And still, now the sticks welding is famous for various reasons. The stick welding process uses the electric current flow and welding stick to join the metals. This process is useful for different kinds of metal alloy to join two parts of metal.

You can use this welding machine for indoor or outdoor use. The main problem is the stick welder cannot weld if the metal is thinner than 18 gauge. You have to change the rod from time to time, and you have to clean it after finishing the job. Stick welding is also challenging to learn, and you have to practice day and night to be a professional.

Most of the Stick welder can run on AC and DC power supply. You can use this welder for home use and hobby projects.

How to use a welder machine?

If you are a newbie at welding works, then you should know how to use a welding machine before start welding. Because without knowing the standard process of a welding preparation, you can put yourself in danger or damage the machine. So, here are some points that you should check before you start welding.

The first thing is safety tools.

Welding helmet

During the welding process, the machine makes so many sparks and light. Too much light can damage your eyes, and the sparks can come to face, which is harmful to you. So, make sure you have a welding helmet, and you wear it before welding. You can buy a helmet online or in your local store.

YESWELDER Large Viewing True Color Solar Powered Auto Darkening Welding Helmet

Welding gloves

It is risky to perform welding in a naked hand. Because you can get an electric shock, or the heat can burn your hands. So, heavy-duty hand gloves are essential for welding jobs. The gloves also can protect you from the radiation of the welding. You can get a pair of gloves from an online store or in the local store. And always wear the welding gloves before practice welding.

RAPICCA Leather Forge Welding Gloves
For Safe and secure from burns try RAPICCA Leather Forge Welding Gloves! Awesome gloves for the beginner. Budget-friendly

Welding apron

It is important to wear an apron before doing any welding works. Because the sparks of the welding machine can burn your cloth or your body, do not any flammable apron during welding, because the flammable apron can end you up in a hospital. You can buy a good quality non-flammable apron from an online store or in the local store.

Waxed Canvas Apron
All beginners should wear a safety Apron before starting your welding task. Because not many DIY activities are without risk. Check this Safety Apron on Amazon. Thanks.

Welding area

You should choose an open place to do your welding because the welding process pollutes the air with vapors and gases, which is harmful to your lungs. If you weld in the open zone, then the harmful gas will not affect your health. So, avoid the close area to perform welding works.

And the welding place should need to be clean. Try to keep away the flammable gas or materials from the welding zone. The welding sparks go everywhere near you. So, if you want to be safe, then put the flammable items in a safe place far from the welding area.

Re-check the welding machine

Before starting, welding checks the welding machine installation. If everything set up properly, then you can begin your welding. Some parts of the welding machine need to change after a time period. So, look for a damaged part before using the machine and replace it with a new one. And clean your welder machine after every use to get the best service.

How to handle a welder torch correctly? 

The most important things about a welding machine are to hold the welding torch/gun properly. If you cannot handle the torch perfectly, then you cannot get your satisfying welding results. So, first, you need to learn how to hold a welding torch correctly. For a novice, it is hard to control a torch perfectly, but by practicing, you can do it correctly.

First, cut the wire in the right size come out from the torch. Then keep a short distance between the torch and the base metal. You need to use your both hand to get better welding result. Hold the in a different angle to get a better view, because, with a clear view, it is easy to do welding.

Choose the right consumable.

You cannot use a different kind of consumable in your welding machine. If you do not select the right consumable for your welding machine, then your machine can damage, and the wrong consumable spoil your welding material. Like in the MIG welder machine, if you use solid wire, then you also have to use shielding gas to get perfect welding.

It is also the same for TIG and Stick welding machine. You need to select the right consumable to perform the welding job. Not only that, for wrong selection for wire and gas can cause too much damage to put you in hospital. So, choose the consumable careful and do safe welding.

Check welding area

After perform welding, you should check the welding area for the result. If you weld is not good, then you need to re-adjust the voltage and the wire feed speed of the welding machine and try again. It is a good practice to check the welding area in every short time.

Review of 10 Best Welders for Beginner:

01 of 10

Forney 322 140-Amp MIG/Stick/TIG Multi-Process Welder- Best welder for the money

Forney 322 140-Amp MIG/Stick/TIG Multi-Process Welder

At a Glance:

Our first welder machine is Forney 322 multi-process welder machine. By using this welder machine, you can perform a different kind of welding task. You can use this welder machine at your home base power supply and do home repair to general fabrication. This unit also can provide the best welding result with a reasonable rate of the duty cycle.

Forney 322 140-Amp MIG/Stick/TIG Multi-Process Welder Review

The Forney Company makes the best tools and tools parts for welders. If you buy this welder machine, then you can get 5 years of manufacturing warranty.

Multi-process welding

Forney 322 support multi welding options, and you can use this welder for various kind of welding purpose. By using this welder machine, you can do MIG welding, Lift TIG welding, Stick Arc welding, and Flux-cored welding. That’s mean you do not have to buy a separate machine to perform different kinds of welding.

And the welding options are easy to change. You can use any of the welding options depending on your needs.

Power

This welding machine is not designed to perform heavy-duty welding. And this welder machine needs only 120 voltage power sources to run. That’s mean you can use this welder machine at your home base power supply and do home repair. This welder machine can supply a maximum of 140 amps of output power, which is ideal for performing lightweight welding jobs.

Duty cycle

The duty cycle of this welder machine is pretty impressive. You can get a different rate of duty cycle by changing the amperage. This machine can provide 20 percent of the duty cycle at 100 amps, and at 60 amps, you can get 60 percent of the duty cycle. And if you want 100 percent of the duty cycle, then you have to set the amps rate at 45.

Welding area

Because of the multi welding option, this welder has a wide range of welding zone. By using this welding machine, you can do general fabrication, auto bodywork, farm and ranch repair, and home repairs. This machine can weld up to 1/8” metals, and you can use up to .035” wire to do the welding. This welder is the best welder for farm use.

Portability

This welder machine is super portable. The weight of the device is only 38 pounds, and the size dimensions are 19” X 9.5″ X16.5”. You can easily carry this welder machine from place to place because of the lightweight. And this machine can fit everywhere because of its small size.

PROS:
  • Easy control pane with Euro-style torch connect
  • Multi-process welding
  • Comes with inverter technology and power-saving mode
  • Digital display controls
  • Comes with all essential tools as a set
CONS:
  • Spool gun, TIG Torch and Foot Pedal does not come with the package
  • Cannot perform heavy-duty welding
Verdict:

This welder machine has an easy control panel and multi-function welding options. That’s mean you are getting 4 welder machines by paying for one device. The quality and welding service worth the price of this machine, and you can take it to learn to weld. And this welder is the best welder for motorcycle fabrication.

02 of 10

LOTOS MIG140 140 Amp MIG Wire Welder- Best welder for beginner MIG

LOTOS MIG140 140 Amp MIG Wire Welder

At a Glance:

This welder machine is perfect for flux-core and aluminum gas shield welding. You can easily control this machine because it has a digital display to monitor voltage and wire feed speed. This welder machine also has 2T and 4T modes to perform the welding. The duty cycle of this machine is good enough to do home repair welding and hobby projects.

LOTOS MIG140 140 Amp MIG Wire Welder Review

The Lotos MIG140 has quality body parts and serves you with the best welding result. This welder machine comes with 30-day money-back options and a 1-year limited warranty.

Performance

This welder can give you the best MIG welding services. You can use 110 voltages or 120 voltage power supply to run this machine. That’s mean this machine uses low voltage input, which is ideal for home base power supply. By providing 110V or 120V, you can get a maximum of 140 amps output power to do welding.

The output is good enough to perform home base repair, and you can do your hobby protects.

Duty cycle

The duty cycle rate of this welder is pretty okay. You can get 20 percent of the duty cycle at 90 amps. This welder is perfect for DIY works, and you can comfortably weld anything with this welder. For beginner level welders, this rate of duty cycle is okay for practicing.

2T and 4T modes

This welder machine has 2T and 4T modes. The 2T way for manual welding option and you have to control the MIG torch manually. And the 4T way is semi-automatic, and this mode uses when you need to do welding for a long time. By using 4T welding mode, you can release your fingers during welding.

Portability

The Lotos MIG140 is portable and small in size. The weight of this machine is only 54 pounds, and the dimension is 16X14.5X9.6 inches. This welder machine also has a grip holder to carry place to place. Because of the portability, you can use this welder machine for indoor repair and outdoor repair.

Accessories included

With this MIG welder machine, you can have all the necessary tools as a set. You can get a MIG torch, ground clamp cable, gas hose, Agron regulator, contact tips, welding mask, and wire. After having this machine, you can immediately start welding.

Pros
  • Flux-cored and aluminum wire feeder options
  • Comes with 2T and 4T welding modes
  • Digital display to control wire feed and voltages
  • Wide range of welding materials
  • It has transformer technology
Cons
  • A spool gun does not come with the package
  • Not suitable for heavy-duty welding

Verdict:

This welder machine is the best welder for novice who wants to learn MIG welding. The digital control and full-adjustment system make the welding process more comfortable. By using this welder machine, you can do steel and aluminum welding jobs. And this is one of the best welder for aluminum welding.

03 of 10

Forney Easy Weld 140 MP Multi-Process Welder – Best multi-process welder for Beginner

Forney Easy Weld 140 MP Multi-Process Welder

At a Glance:

This welder machine comes with 3 in 1 multi-function welding options. It also has easy start systems, which makes it easy to use, and you can get satisfying welding results. This machine also has infinite voltage and wire feed controls, and the output is ideal for small projects. The welder is portable, and you can easily move this machine anywhere you want.

Forney Easy Weld 140 MP Multi-Process Welder Review

This welder is another welder from the Forney industry. With this welder machine, you can get 30-day money-back options and a 1-year limited warranty.

Multi-process welding

Forney Easy weld140 can perform different kinds of welding. This welder can use as a MIG, TIG, and Stick welder. You can use any of the welding options you want, and the welding options are easy to change. If one welding option is not available, then you can use other welding options to continue your welding works. This is the best welder for everything.

Easy control panel

The control panel of this welder machine is easy to use. This welder has easy start welding systems to make welding easier than before. You can also easily change the position of the switch to change the welding process. It also has infinite voltage and wire feed control provides you perfect welding result.

Power

This welder needs 120 voltage power supplies to run. That’s mean you can use the home base power supply to operate this machine. At this input power, you can get a minimum of 10 amps to maximum 140 amps output power. And this power is ideal for DIY projects.

The duty cycle of this machine is good enough to serve you better. You can get different duty cycle rates in the various welding processes. By using the MIG welding option, you can get 30% of the duty cycle at 90 amps and 30% duty cycle at 80 amps for the Stick welding option. For the TIG welding option, you can get 30% of the duty cycle at 110 amps.

Portability

This welder machine is easy to carry place to place because it is portable. The weight of the welder machine is only 24.81 pounds, and the dimension is 14.19X19.31X11.61 inches. It also has a good quality grip holder to move one place to another.

Accessories Included

With this welder machine, you can get a 10 feet MIG gun, 8 feet electrode holder, 8 feet ground clamp, 20A-15A adapter, and contact tips. You will find everything with the welder machine to start welding, and all the tools come as a combo set with the package.

PROS:
  • Easy start welding systems
  • Multi-process welding options
  • 30% of the duty cycle rate in every welding process
  • Portable and easy to carry
  • Comes with 12 months warranty
CONS:
  • TIG welder accessories do not come with the package
  • Design for lightweight welding works
Verdict:

This welder machine has an easy control panel, which is a perfect match for a novice. By owing this welder, you do not have to buy a new device to learn different welding processes. You can practice all the welding processes by using one machine. The portability allows you to take the machine with you everywhere you go.

04 of 10

YESWELDER Digital MIG-205DS MIG Welder- Best welder to buy for beginners

YESWELDER Digital MIG-205DS MIG Welder

At a Glance:

This welder machine has Synergic control systems, and you can easily operate this machine. By using this welder machine, you can perform MIG, TIG, and Stick welding. This welder also has a gas shield and gasless welding options. The digital display control makes the welding process hassle-free. You can do heavy-duty welding works by using this machine.

YESWELDER Digital MIG-205DS MIG Welder Review

This welder is one of the affordable and best quality welders you can find in the market. With this welder machine, you can get a 1 -year of manufacturing warranty and 30 days money back option. And this welder is one of the best cheap welder for beginners.

Control panel

The YESWELDER MIG-205DS has a Synergic control panel. Because of this system, you can easily operate the machine and do your welding. By using this, you can easily do lightweight hobby projects and heavy-duty welding. It also has a digital display to monitor the voltage and wire feed speeds. The design of this welder machine is suitable for both newbie and professional workers.

This welder machine also has 2T and 4T modes to do welding.

Multi-function welding option

This welder also has multi welding options. You can use this welder as a MIG, TIG, and Stick welder machine. This welder can perform gas shield and gasless welding, depending on your needs. The welding options are easy to change, and you can use any of the welding processes by change the switch positions. And if any welding options are not available for doing welding, then you can use the other welding options to continue your works.

Power

You can use dual voltage options to run this welder machine. This welder machine can run on low input voltage 110V, and you can also use 220V for heavy-duty welding purposes. That’s mean you can use this welder at your home base current supply and even for outdoor repairs. You can get 160 amps of output power by using 110 voltage and 200 amps output by using a 220 volts power supply.

Welding area

This welder machine can take up to 1.0mm MIG solid wire to do gas shield welding. And you can use up to 1.0mm flux-cored wire to do gasless welding. You can use D200 rolls of MIG wire in this machine to do welding. This welder machine is the best option to do mild steel welding.

Portability

The portability is a plus point of this welder machine. The weight of this welder machine is only 35 pounds, and the dimension is 20.1X14.8X11.4 inches. You can easily carry this welder machine with you at the workplace. This welder also has a grip handler to increase portability. And the size of this welder can fit almost everywhere you go.

PROS:
  • Comes with Synergic Control and easy to operate
  • Multi-process welding
  • Dual voltage option 110V and 220V
  • 2T and 4T modes
  • Lightweight and portable
CONS:
  • Not suitable for outdoor use
  • TIG torch is not included in the package
Verdict:

You can get this welder machine in a low budget. This 4 in 1 welder machine can give you more items to practice. The easy control panel helps you to operate smoothly, and dual voltage options let you work indoor and outdoor. This lightweight welder is one of the best MIG welder for the money.

05 of 10

SUNGOLDPOWER ARC MMA Welder- Best TIG welder for beginner

SUNGOLDPOWER ARC MMA Welder 200A Lift TIG Welding Machine

At a Glance:

This welder machine has a compact design with portability. The digital display control and IGBT inverter technology make the welder process easier. You can use a dual voltage option to perform your welding jobs. The duty cycle is good enough to do welding on various metals. It also has a great protection system to prevent any kind of accident.

SUNGOLDPOWER ARC MMA Welder Review

This welder machine can provide you satisfying welding result. You can get a 1-year warranty with this welder.

Control panel

This welder machine has an easy control panel, and anyone can operate this machine. It has a digital display to control the voltage and wire feed speed. The advanced IGBT inverter technology makes the welding process more comfortable than before. This IGBT tech gives you full control over your machine and produces the best welding results. You can quickly move this welder because it’s lightweight and portable.

Power

You can use a dual voltage option to run this welder machine. This welder has 110 voltages and 220 voltages power supply options. The low input 110V is perfect for home use, and you can do your hobby projects. And the 220V is for outdoor heavy-duty welding works. You can easily change the voltage option just by changing a plug. This machine can produce 20 to 200 amps of output power during welding.

The duty cycle rate of this welder machine is also impressive. You can get 60 percent of the duty cycle at maximum power. And this is good enough for a beginner level worker.

Protection

The SUNGOLDPOWER welder comes with intelligent protection systems. That’s mean it can prevent an accident if anything goes wrong. This machine has over-voltage protection, low-voltage protection, over-current protection, and over-heat protection. The welder machine will switch off automatically if anything exceeds the normal limits and avoid unwanted accidents. This system helps you to stay safe and keep the machine damage free.

Welding area

This welder machine has a wide range of welding materials. You can use this welder on mild steel, stainless steel, and you can do cast iron. This welder is ideal for home repair, industrial welding, repair, and maintenance. In every sector, this welder can serve you the best welding service.

Accessories included

With this welding machine, you can get all the necessary equipment to start welding works. Inside the package box, you can get a DC welding machine, work clam with 10 feet cable, input power adapter cable and plug, 59.05 inches ground clamp, 98.40 inches electrode holder, and a user manual.

PROS:
  • Comes with advanced IGBT inverter technology
  • Dual voltage options 110V and 220V
  • Lightweight and portable
  • Comes with intelligent protection system
  • All accessories come with the package
CONS:
  • Cannot perform MIG welding
  • TIG torch does not come with the package
Verdict:

You can choose this welder machine because it has a compact design. Its IGBT system lets you control the machine quickly and gives you full access. A dual voltage and protection option makes this welder safe for home repair.

06 of 10

Millermatic 141 MIG Welder – Best miller welder for beginner

Miller Welder, MIG/Flux Core, 120V, 90A

At a Glance:

The Miller 141 MIG welder has easy control panel systems and a smooth start function. This welder comes with an automatic and manual function to do welding. It can run on low input voltage and gives you the best welding service. You can perform welding on steel and aluminum by using this welder machine. It also has perfect over-load protections to save you and the device. This one of the best MIG welder for beginner level workers.

Millermatic 141 MIG Welder Review

The Miller industry makes one the best quality welder you can find in the market. With this welder, you can get 1/3/5 years of manufacturing warranty.

Control panel

This welder machine has a user-friendly control panel, and anyone can operate this unit. The welder has an auto-set function, which sets the welding parameter automatically. Simply you just have set the wire type and materials type, and you can start welding. This welder also has quick select drive roll systems to provide consistent wire feeding.

The welder can detect spool guns automatically because it has an auto spool gun detect system. The drive roll system offers three grooves. Two grooves for solid wire and another one for the flux-cores wire. And if you want, you can operate this welder machine manually.

Power

This welder can run on a low voltage input power supply. You need 120 voltage power supplies to make this welder work. That’s mean you can comfortably use this welder at for home repair and to complete your hobby projects. You can also use 110V or 115V power supply to run this machine. This welder machine can provide you 20% of the duty cycle at 90 amps.

Welding area

By using this welder, you can perform solid wire and flux-cored wire welding. That’s mean you can do gas shield and gasless welding. This machine can perform welding on up to 24 gauge mild steel and up to 18 gauge aluminum sheet. You can use this welder for your DIY work, metal art, farm, and manufacturing work. This welder is the best welder for aluminum and steel.

Protections

This welder machine comes with great built-in protection systems. It has thermal overload protection, and the machine can switch off itself if the heats exceed the limits. This protection system saves the machine from internal damage and prevents any kind of unwanted accidents.

Accessories included

With this welder machine, you can get all the essential tools as a set. You can get a MIG gun with 10 feet cable, work clamp with 10 feet cable, argon, and AR/CO2 mix flow gauge regulator, gas hose, two contact tips, solid wire, and flux-cored wire.

Pros:
  • User-friendly control panel
  • Auto spool gun detect systems
  • Can perform gasless and gas shield welding
  • Thermal over-load protections
  • Smooth start technology
Cons:
  • Aluminum spool gun not included
  • The shielding gas is not included
Verdict:

This welder has the best quality body parts, and you can get the best welding results. Besides welding, you can also use this welder for fabrications and other essential jobs. This welder is the best welder for fabrication, easy to operate.

07 of 10

Lincoln Electric K2278-1 Handy Core- Best Lincoln welder for beginners

Lincoln Electric K2278-1 Handy Core Welder

At a Glance:

The Lincoln industries are making good quality welders for a long time. This welder also has a good quality body parts and proper welding service functions. You can use this welder at your home without any hassle because it has a low input power supply system. This welder also has a cold contactor safety feature and cooling fan to keep you safe and the machine, and this is the best flux welder for beginners.

Lincoln Electric K2278-1 Handy Review

This welder machine is one of the best flux-cored welding machines you can find in the store. With this unit, you can get a 1-year warranty on parts and labor. And you can also get 90 days warranty on gun and cable.

Control panel

The simple control panel systems make this welder machine easy to use. This welder is ideal for both novice and professional welders. The control panel design gives you full access over the welder machine. You can find a guideline on the welder body on how to control them perfectly. This welder machine is easy to carry place to place, and you can take it with at your work site.

Power

This welder machine can run on the low input voltage. You need 115 voltage power supplies to run this welder machine. That’s mean you can comfortably use this welder machine at your home base power supply. You can get 35 to 88 amps of output power by using this welder machine. This welder machine can provide 20 percent of the duty cycle at 70 amps. And you can get a maximum 300 ipm wire speed during welding.

Welding area

By using this welder machine, you can weld on different materials. This machine you can weld up to 1/8 inches mild steel. You can use this welder machine for home repair or your hobby projects. The welder machine can perform lightweight welding works. This welder machine is the best welder for garage.

Cooling fan

This welder machine has a built-in cooling fan to keep the machine at normal temperature. During welding, the welder gets too hot, but the cooling fan takes out the hot air and tries to keep the machine cold as much as it can. This cooling fan also increases machine life expectancy.

This welder also has cold contactor safety features to keep the welder cold until the gun trigger is pressed.

Accessories included

You can get all the essential tools with this welder machine. With this welder machine, you can get a welding gun with cable, work clam with cable, two contact tips, one spool of flux-cored wire, handseled, clear glass, chipping hammer/brush. You can get everything to start welding.

Pros
  • Easy control panel systems
  • Run-on low input voltage 115V
  • Cold contactor safety system
  • A built-in cooling fan system
  • Comes with 12-month parts and labor warranty
Cons:
  • Cannot perform heavy-duty welding
  • Only perform flux-cored gasless welding
Verdict:

This flux-cored welder is best for a newbie welder. It is easy to use, and you can easily carry this welder with you. You can perfectly practice with this welder at home on your hobby projects. This one is the best welder for general use.

08 of 10

Hobart 500551 EZ-TIG 165i AC/DC TIG Welder 230V- Best TIG welder for beginners

Hobart 500551 EZ-TIG 165i AC/DC TIG Welder

At a Glance:

This TIG welder is easy to operate, and anyone can maintain this welder machine. It has an easy pickup function to perform welding and a remote for the foot paddle. This welder also has significant power to perform welding on different kinds of metal. The auto fan cooling systems increase this welder machine life acceptance. This welder is the best welder for cars repair and bodywork.

Hobart 500551 EZ-TIG 165i AC/DC TIG Welder 230V Review

Hobart is famous for its welder machines. Every welder has quality body parts, and they are American made. With this welder machine, you can get 1/3/5 year of manufacturing warranty.

Control panel

You can get a user-friendly control panel if you pick this machine. By using this welder machine, you can do hassle-free welding. To start welding, you just need to select the metal type and set the thickness of the metal, and you are ready to do welding. This welder machine also has a remote control food paddle to perform smooth welding.

Power

You are going to need 230 voltage power sources to run this welder machine. This AC/DC TIG welder also can run on 220V and 240V power supply. You can use this welder machine for heavy-duty outdoor works. This welder also can perform home repair, and this is the best welder for the fabrication shop. And you can get 20 percent of the duty cycle at 150 amps.

Welding area

By using this welder machine, you can weld on various materials. This welder machine can weld up to 22 gauge or 3/16 inches steel. You can comfortably weld aluminum, steel, stainless steel, and other metals. This welder can provide you the best welding service on every type of metal, and this is the best TIG welder for thin aluminum.

Fan-on-demand

The welder machine has cooling fan systems to keep the welder temperature healthy. This cooling system only runs when necessary. That’s mean the fan will work when the welder machine gets too hot. This system reduces power usages and makes less noise. The device also gets less dust and debris because of this system.

Accessories included

This welder machine comes with a TIG torch with 12.5 feet cable, nozzle, and 12 feet work cable with clamp, remote foot control, regulator/flow gauge with a hose, and power cord with plug. You can use every essential tool with this welder machine as a set. And you can start welding after getting at your hand.

Pros
  • Easy control panel
  • Remote control foot paddle
  • Support both AC/DC power supply
  • Fan-on-demand cooling system
  • Comes with all the essential tools
Cons
  • Cannot perform MIG welding
  • Do not come with Stick welding option either
Verdict:

If you want to learn TIG welding, then you can choose this welder machine. Because it has greats features and a wide range of welding materials to work. You can also do aluminum welding by using this welder machine, and this is the best welder for aluminum TIG.

09 of 10

2019 EverlastPowerTIG 185 DV TIG Stick Welder- Best stick welder for beginners

2019 Everlast PowerTIG 185 DV AC/DC TIG Stick Welder

At a Glance:

This multi welding machine is the best match for every type of welder. You can perform TIG and Stick welding by using this machine. It has IGBT inverter technology and dual voltage options. You can efficiently operate this welder and get high-quality welding results. This welder can perform welding on thin to thicker metals like steel and aluminum. And this is the best welder for thin aluminum.

2019 EverlastPowerTIG 185 DV TIG Stick Welder Review

Everlast industries are serious about their product quality, and this welder machine best quality parts built-in. You can also get 5-years of parts and labor warranty with this welder machine. And this is the best welder for cast aluminum.

Control panel

This welder machine has easy control panel systems. The welder machine can operate by a novice or a professional welder. It also has IGBT inverter technology to provide the best welding results. You can get a smooth welding experience by using this welding machine. This machine has an automatic pre-flow operating system to produce high-quality welding. If you want, you can operate this machine manually.

And it also has a digital display and touch button to control this machine. The 2T and 4T welding modes make the welding process easier.

Power

You can use dual voltages option to run this welder machine, and this machine can run on AC or DC power supply. This welder machine can run on 110 voltages and 220 volts power supply. That’s mean you can use this welder machine at your home base current supply and do home repair. This welder machine can provide 120 amps output for 110V and 200 amps for 220V.

You can get 35% of the duty cycle at 105 amps on 110V and 35% duty cycle at 185 amps on 220V. If you want 100% of the duty cycle, then you can use 70 amps on 110V and 130 amps on 220V. This welder can provide the same duty cycle for both TIG and Stick welding.

Welding area

By using this welder, the machine can weld different thicknesses of metals. You can weld steel and aluminum with this welder machine. This welder machine can weld up to 1/4“steel in a single pass and 5/8” steel in multi-pass. For aluminum, you can weld up to 3/16” in single pass and ½” in multi-pass. By using this welder machine, you can weld minimum .007” steel and .018” aluminum. This welder is the best welder for thick aluminum.

Portable

This welder machine is lightweight and super portable. The weight of this welder machine is only 40 pounds, and the dimension is 24X9X17 inches. It also has a grip holder to move quickly. You can take this welder machine everywhere with you for welding purposes.

Accessories included

You can get every essential tool with this welder unit as a set. With this unit, you can get a TIG torch with 12 feet cable, work clam with 10 feet cable, argon regulator, 6 feet input power cable, 120/240V adapter, and other tools.

Pros

  • Can perform Stick and TIG welding
  • Easy control panel system with digital display
  • Dual voltage options
  • Lightweight and portable
  • Comes with 3-years of warranty
CONS:
  • Cannot perform MIG welding process
  • Tungsten consumable kits not included
Verdict:

This welder machine has an easy control panel with IGBT inverter technology. You can use dual voltage options to operate this machine. It has TIG and Sticks welding options to practice. And you can easily carry this welder because it’s lightweight and portable. This welder is the best welder for pipeline.

10 of 10

2020 Weldpro 200 Amp Inverter Multi-Process Welder- Best welder for your money

Weldpro 200 Amp Inverter Multi Process Welder

At a Glance:

This welder machine comes with a multi-process welding system. It also has a digital display to control voltage and wire feed speed. You can efficiently operate this machine because it has a synergic function. Dual voltage options make it useable everywhere, and you can work indoor and outdoor. This welder can provide a great rate of duty cycle rate to weld.

2020 Weldpro 200 Amp Inverter Multi-Process Welder Review

This welder machine can give you the best service at the worksite. And this welder comes with a 2-years of manufacturing warranty.

Multi-process welding

One of the best features of this welder machine is multi-process welding. This machine can use as MIG, TIG, and Stick welder machine. You can also perform gasless flux-cored welding by using this welder machine. The welding option is easy to change, and you can use any of the welding processes whenever you need it.

Control panel

This welder machine has a user-friendly control panel system. You can use any of the welding processes very easily because to change the welding process, all you need to do is change the switch positions, and you are ready to weld. This machine also has a synergic system to make welding easier than before. Both novice and professional can use this weld with pleaser.

This machine also has a digital display to control the voltage and wire feed speeds.

Power

You can use a dual voltage option to run this welder machine. This machine has 110 voltage and 220 voltage options to perform welding. That’s mean you can use this welder machine at your home base current supply to do home repair and complete hobby projects. And the high voltage option is for heavy-duty outdoor works.

This welder machine can provide 15 to 200 amps of output power to do welding. And you can get the same rate of the duty cycle for every welding process. This machine can provide 30% of the duty cycle at 200 amps.

Welding area

This welder machine has a wide range of welding areas because of the multi-process welding system. By using this welder machine, you can weld on steel, stainless steel, aluminum, and other metals. You can use this welder for home base repair and hobby projects. This welder is one of the best welder for aluminum and stainless steel.

Accessories included

This Weldpro 200 amp welder comes with all the essential tools as a combo set. With this welder machine, you can get a MIG torch with 10 feet cable, TIG torch with 13 feet cable, electrode holder with 10 feet cable, earth clamp with 10 feet cable, gas hose, and power adapter.

Pros
  • Multi-process welding
  • Dual voltage option 110V and 220V
  • It has synergic technology
  • Lightweight and portable
  • Digital display control for voltage and wire speed.
Cons
  • Some tools are not included in the package like the gas regulator
Verdict:

You can get this welder machine can it has a multi-process welding facility and no need to buy a new machine to learn different welding processes. It also easy to operate, and dual voltage options let you work everywhere. This welder is the best weldpro 200 amp inverter multi-process welder you can find in the market.

What We Research Before Pick These Best 10 Welders For Beginners?

You can choose any of the welding machines from above because we do research enough to find out every advantage side and disadvantage side of the welders. For a beginner-level welder, the machine needs to be easy going and should have an easily understandable interface.

So, there is the point we think about before choosing these welders for beginners. And you should also think about these topics before buying any welder machine for learning weld.

Easy control panel

Choose a welder machine with easy control panels. Because welder machine with a complex control panel is hard to maintain and it can waste your valuable time to fixing it. By using a welder machine with an easy control panel, you can quickly understand which switch for what purpose. You can also set your desire voltage and wire feed speed to get perfectly welding.

Performance of welder

You can find different type of welder machine provide a different level of power. For beginner level workers, low voltage welder is ideal. Some of the welder machines come with dual voltage options, and those are the best welder for home use, and you can learn how to weld with different options of voltage.

If you choose a welder with a low input power supply, then you can conformably use the unit at your home base power supply. The high voltage welder machine made for heavy-duty welding, and only the professional welders use it for outdoor works. So, pick the right one when you are choosing your welder machine.

Duty cycle

Welder performance depends on the duty cycle rate. With the highest rate of duty cycle, the welder can weld for a long time. And the low rate of welder machines provides a short time for welding. So, it is essential to choose a welder machine with a good rate of the duty cycle. Try to buy a welder with a reasonable rate of the duty cycle.

The beginner level welders do not need a welder with 100% of the duty cycle. You can perfectly practice with a 30% to 60% rate of the duty cycle. The duty cycle rate calculates on 10 minutes of the time. The 60% of the duty cycle means you can use the welder machine to do welding for 6 minutes, and then you have to stop for 4 minutes to cool down the welder.

Portability

Another essential thing for a beginner level welder machine is portability. The low weight welders are easy to carry place to place, and you can bring the machine everywhere with you. Portable welders also come in small sizes, and it can almost fit everywhere. Portable welder machines have a grip holder to make the transport easy. So, try to get a welder with a portability facility.

Protection

Never take your safety lightly because you can get in a serious accident if you do not obey the safety rules or push the machine to perform more than its capability. Most of the new welder machine comes with built-in protection, and it will shut down itself if you exceed the welding limits.

Before buying any welder machine, check if the machine has advanced protection systems. Some of the welders come with overheat protection or cooling fan. Whatever you do, always put your safety first.

The FAQs About The Best Welder for Beginners

What’s the best welder for home use?

For home use, you can pick Forney or Lincoln welder. Other welders can handle home base welding nicely. So, you can pick any of them from the list.

What’s the best welder for aluminum?

You can use Hobart 500551 EZ-TIG 165i AC/DC TIG Welder 230V to perform aluminum welding. This welder can weld thin to the thicker aluminum sheet.

What is the best type of welder for beginners?

Every welder on the list is the best welder for beginners to start. You have to decide which one you like most and with which one you want to start welding.

What is the best welder for the money?

Every welder is best, but 2020 Weldpro 200 Amp Inverter Multi-Process Welder is best toward your money.

Conclusion

I hope you already know what a welder machine is and how you can choose the right one for you. The welder selection always depends on your decision and with what type of welding you want to start. You can select MIG, TIG, or Stick welder as your first welding machine and start learning.

Do not heist to choose any of these welders from above to start learning. If you can learn one welding process correctly, then you can easily cover the next welding process you are willing to learn. So, set your budget and bring your welder to start working.

Never give up on your hard work, if you do practice enough, then you can be an excellent professional welder one day. Starting is always hard, and you have to keep learning. I wish you good luck, and if you are still facing a problem, then I suggest you visit our welding guide article.

References: 

  1. https://en.wikipedia.org/wiki/Welding
  2. https://www.lincolntech.edu/news/skilled-trades/welding-technology/types-of-welding-procedures
  3. https://www.millerwelds.com/products/product-selection-guide

Daddyspick.com – Get daddy’s best ideas. Expert daddy is picking the best things from the web. Also, “daddy can fix anything” check your solution at the “Blog” section.